Electric Floating Sinking Fish Feed Extruder Machine 0.5-0.6 T/H Optional Phase

Electric Floating and Sinking Fish Feed Extruder Machine In Mozambique

Working Principle of Dry Type Fish Feed Extruder Machine

There is no need to heat outside the machine, through the screw extruding of the raw material, heat is produced and gathered during the rotary working process in the airtight environment, and during the high temperature ripening process, the starch and fiber of the raw material become swell. Then under the pressure-tight condition, material will be formed into pellets by shaping mould. At the end, through the high pressure produced by the regular rotating of the screw, after being cut by the forepart cutter which rotates regularly and high-speedily, the finished products will be shrunk and become small average puffed balls in room temperature and pressure.

Spotlights of Dry Type Fish Feed Machine

1. The fish food extruder is widely used for producing floating feed pellets of all kinds of aquatic animal, sinking and floating aqua-feed pellets both can be made just by adjusting feed formulation.

2. Different molds can be chosen to make pellets with different diameters (0.9-15mm) and shapes.

3. Advanced technology and humanized design ensures easy operation and reliable performance, high efficiency, low power consumption.

4. Electric heating device is adopted to improve the feed expansion rate and pellets floating time.

Technical parameters of Dry Type Fish Feed Extruder machine